So after I found out that there were a couple of leaks in my monte I decided it was time for a new interior. The heater box and 2 rear windows were the main culprits for the leak. I fixed those and the ripped out the carpet. While I took apart the whole interior I thought to myself how good a black interior would look versus the slate blue that was in there. I then cleaned up all of the trim, center console, etc and painted it all black. I ordered myself some POR15 and went to town on the floor. I also picked up a new black carpet from opgi. Sadly I ran out of money for new black vinyl seats from procar but those should be in soon; hopefully. in so many words, thats how it went. However, it wasnt that simple and plus pictures explain it better. I also decided to scrap the back bench because when the car leaked it completely destroyed the bench and the back. Finishing the back and installing the old trim is basically all that is left.
After the marine clean and metal ready
This is after the silver and black paint coatings. About 3 coats of the silver and 2 of the black.
And then some random shots....there is also a shot of my roof that I sanded down and primered.
The monte
The motor
The turn downs...
After the marine clean and metal ready
This is after the silver and black paint coatings. About 3 coats of the silver and 2 of the black.
And then some random shots....there is also a shot of my roof that I sanded down and primered.
The monte
The motor
The turn downs...
