newkid

[newkid86]

My names Nick, i'm 17 n' from Jersey. i'm currently building my 1st ever project car... my 1986 Chevy Monte Carlo LS/SS. So far on the LG4 (low output 305ci) i've replaced the stock 450cfm manual coke carb n' the old heavy intake w/ an Edelbrock RPM Air-Gap Intake, 650cfm electric choke Edelbrock carb, headers leading back to 2 1/2" dual exhaust w/ 40 Series Flowmasters mufflers... i'm running w/o converters b/c of the swap from computer controled emissions to HEI ignition. the motor is backed by a 2004R trans. following through to a stock non-posi 7.5 rear with 3.08's

other sites i'm on
-cardomain.com-
-montecarloss.com-

i've been on these other sites getting lots of good info n' learning alot but want to expand some n' see what i can pick up.

 

[el_sonoma]

Welcome Nick.
You'll find lots of G Body knowledge on this site. By the sounds of what you've done so far, you all ready know a few things.
Good luck with your project!

Ron.

 

[newkid86]

thanks a lot it's been fun so far. getting the exhaust done was just about the only thing we weren't able to do. i see you have your own project goin... how are thing w/ that?

 

[el_sonoma]

Good to hear you're enjoying it.
Did you have the exhaust done or do you have future plans for that? 'Cause what you've got sounds good.
My project is rolling along, lot of planning. Pics in my gallery.

 

[Blake442]

Welcome!

 

[newkid86]

So far on the 305 i've replaced the stock 450cfm manual coke carb n' the old heavy intake w/ an Edelbrock RPM Air-Gap Intake, 650cfm electric choke Edelbrock carb, headers leading back to 2 1/2" dual exhaust w/ 40 Series Flowmasters mufflers... i'm running w/o converters b/c of the swap from computer controled emissions to HEI ignition.
just yesterday we took out the open 3.08 rear n' threw in a posi w/ Richmond 3.73's. i'm looking to get a mini starter so i can get a little more timing into it (having a big problem with it) after that i'm looking at getting a better cam in too (lunati 60102).