Was thining about updating the wireing and stuff in my cutlass but I dont know if painless or anybody makes something for the g bodys. I have a 461 big block olds so i know it wouldnt be a perfect match or anything but something I could use maybe.
Painless make a wire harness for gbodys?
- Thread starter 85_455_cutty
- Start date
- Status
It really depends on what all you plan on running. I called them and they suggested i use this harness. part#20102 18 circuit harness.
Theres an aftermarket harness on eBay right now advertsed for Hurst Olds', not sure if its universal or specific to G bodies.
the 18 circut universial kit painless has pretty much plugs right in i got the complete harness for my cutlass and it all was pretty easy besides the fact i pulled my old one before i got the new one so i had to path sum wires back together that didnt come in the kit like part of the heater wires and door wires for locks windows stuff like that and u will need rool of ground wire so u can change that cause their is none in their kit other then that pretty easy like i said dont rip anything out until u get the kit and do it 1 wire at a time much easier
- Status
