Putting heat back in my 87 regal.. please help

[rhyno811]

Ive been googling and searching and i cant get all the info i need so here goes:

My regal was stripped by po of all harnesses, heat /AC. And every duct and line down to the controls for it. I want to put the stock heat back in the car. I acquired the heater box for the firewall, but thats it. Can anyone show me pictures of everything. I am going to need under the dash? I have someone with an insane amount of parts and its un organized so i need to find the parts by knowing what they look like. Please help guys. Thanks

 

[rhyno811]

Not sure what the wiring harness looks like either... Any bit of info will help

 

[rhyno811]

No one can even point me in the right direction? No one has pictures of ac delete ducts and heat/ac ducts or wiring harness? I dont know what other gbodies had same ducts behind dash.. Im trying to do this blind because its non existent in my regal. Any help please....

 

[pagrunt]

You need a Buick service manual to help put it back together, it will show the break down of everything. Even go to the local bone yard to see how it all goes as you take what you need off.

 

[rhyno811]

You need a Buick service manual to help put it back together, it will show the break down of everything. Even go to the local bone yard to see how it all goes as you take what you need off.

6 yards around me pretty much laughed when i told them the car im looking for in their yard.. No regals or any g bodies besides gutted cutlasses.

 

[O. D. Showtime]

Here's a link to a member that had a complete heat only set up for sale...

viewtopic.php?f=31&t=52492&p=445598&hilit=heater+only#p445598

 

[rhyno811]

Thanks. I pm'd him. Hopefully its still available.

 

[rhyno811]

Yeah not dropping 350 on putting heat in my car... I just need to know the components i need to make it work.. I guess im beating a dead horse cause no one knows...

 

[81Regal]

The ductwork, glovebox and blockoff plates are specific to the Regal, underdash cables would have to be from a Cutlass or Regal, the main heater box and wiring can be sourced from any G body. This is just for a heater only setup and they are very rare for Regals.
Same goes with the heater/AC box except instead of the blockoff plates it would be the vents, and would have a vent below the steering collumn rather than the vent cables. Dash controls are even different between the two.

 

[rhyno811]

Well then i guess im going with an aftermarket setup for heat and defrost... Thanks guys. I hate when people rape cars of a few pounds thinking they are gonna brake a land speed recors with a regal.. Stupid po