seat tracks

[fodoimp]

anybody know of any other cars seat tracks that will closely match up with a g body? I have a power seat that is busted on the driver side was going to make it manual for the time being till I can afford to replace/repair my power seat track. Or does anyone have an extra 60/40 driver side track or driver side bucket seat track. Thanks!

 

[n33no]

I'm not sure but I believe you can use the tracks out of a S10 truck

 

[JrJohnston]

You can use the tracks from a bench seat car. Just mount them to youe seat and cut the track release wire down to the right length to work the track release.

 

[fodoimp]

thanks for the info that is what Ill do now I just have to find a gbody in the junkyard!

 

[JrJohnston]

thanks for the info that is what Ill do now I just have to find a gbody in the junkyard!

No problem, I have done it a few times in the past.
Most of the time it is a cheap way to fix a power seat, that is unless you have a extra power seat assembly setting around.

 

[fodoimp]

well I need the coupler that goes between the motor and everything else....the are about 25 on ebay but Im not sure if there is anyhting else wrong with it or not so Id like to have a backup plan for when I go to put the seat sin just in case.

 

[JrJohnston]

well I need the coupler that goes between the motor and everything else....the are about 25 on ebay but Im not sure if there is anyhting else wrong with it or not so Id like to have a backup plan for when I go to put the seat sin just in case.

Are you talking about the cables? If so those are cheap and easy to replace, but you may also run into a rounded out plastic insert that the cable goes in. If you have that problem then you will have to replace that drive motor.