serpentine pulley set

[Kwikr 1]

dropping in a Twin Turbo sbc in a 87 Regal.Is there enough room between rad and crank/water pump pulley to run a serpentine pulley with power steering take off ? Looking at pulley kits for my TT sbc , and I would like to go with a March Performnce serp setup . also running dual electric fans on a alum BeCool rad . the dual fans look like they will eat up a little room . Thanks


Here's pic of the same TT kit I'm using with a March setup .only difference being mine will be intercooled .

 

[RITTER]

I should have plenty of room there. Another option to free up some more room would be to get "pusher" fans and install them on the front side of the radiator :idea:

 

[Kwikr 1]

I should have plenty of room there. Another option to free up some more room would be to get "pusher" fans and install them on the front side of the radiator :idea:

I thought of that ..putting the dual fans in front of rad (pusher fans ) . but that may only causes another problem with having room for the intercooler . Thanks for replying . 🙂