serpentine setup for 88 cutlass

[ssrider95]

Im trynna put a serpentine setup on my chevy 350 motor but i dont have any accessory holes in my heads. I have the old double hump heads. Any advice would be greatly appreicated

 

[megaladon6]

not to be snotty but, lose the heads! the double humps are not very good heads.

 

[Blake442]

Im trynna put a serpentine setup on my chevy 350 motor but i dont have any accessory holes in my heads. I have the old double hump heads. Any advice would be greatly appreicated

Either ditch the heads or learn to live without the serpentine setup...

 

[DRIVEN]

With the heads you have - save your money:
http://cgi.ebay.com/ebaymotors/Billet-S ... 4cecc33525
With some different heads (with accessory holes) you could get the entire system from pretty much any V8 or 4.3 V6 from about 1988-up. The whole system shouldn't cost more than $200 at most wrecking yards. Good luck.