Stall or MSD 6AL-2?

[njRegal86]

Which one do you guys think is better, the MSD 6AL-2 Ignition system with 2 Step Launch Control or a nice Stall Converter?

 

[CHRIS.O]

Would need to know a lot more about your build but no matter what if your running a stock stall than a higher stall speed will help any car.

 

[CWPottenger]

The MSD will not overcome a stall converter not properly set to engine/trans/vehicle weight. 1st I would select a stall converter that works with the power band, after that the MSD controller allows you to maximize vehicle characteristics and driver skill.

 

[JBreu]

Would need to know a lot more about your build but no matter what if your running a stock stall than a higher stall speed will help any car.

x2....Start with the basics and then move to the electronics....With regards to converters I would reccomend thses guys http://WWW.ptcrace.com Give them a call and they can set you up just fine and thet are highly rated. That's who got my business.

 

[njRegal86]

Im doing a complete engine swap, pulling the 307 and replacing it with a crate Chevy 350. Im not sure what kind of stall speed it will have but I do know that it has 355HP and 380LB-FT. Thats about it right now.