Hey guys, putting a bbc in the wagon and I know how this goes.. Car currently has a strong 355 in it but need to step it up and sbc isnt going to cut it. Parts list:
454 .30 over (460)
Icon 10.3 comp forged pistons (Running pump/e85)
LS7 dimple rods
Polished stock steel crank
Flow Tek alum heads
Voodoo .690 roller cam
Full Lunati/Ferrea valvetrain
Gear drive
old low rise manifold with 750 for break-in, tunnel and dual 1150 dominators afterwards
2 stage N2O
Hughes 5500 stall (will be reving to 7300-7500)
A body 2" primary headers
Going in a 83 wagon, th400, 8.5 GN rear end with 4.10 posi. Car has the tubular trans crossmember, adjustable links in rear, 3" X pipe to 4" bullets and a bunch of other stuff Im forgetting. Its not pretty- its more of a street racer than track car so its ratty and I know, pics are needed...
454 .30 over (460)
Icon 10.3 comp forged pistons (Running pump/e85)
LS7 dimple rods
Polished stock steel crank
Flow Tek alum heads
Voodoo .690 roller cam
Full Lunati/Ferrea valvetrain
Gear drive
old low rise manifold with 750 for break-in, tunnel and dual 1150 dominators afterwards
2 stage N2O
Hughes 5500 stall (will be reving to 7300-7500)
A body 2" primary headers
Going in a 83 wagon, th400, 8.5 GN rear end with 4.10 posi. Car has the tubular trans crossmember, adjustable links in rear, 3" X pipe to 4" bullets and a bunch of other stuff Im forgetting. Its not pretty- its more of a street racer than track car so its ratty and I know, pics are needed...
