ThxGvng Morning at the yard

[5spdCab]

Good morning all. At the JY, opening in 5 min. Website shows a gbody regal, does anybody need parts? I will be browsing the yard for the next few hours.
Edit: my bad, not a Regal, but a 1980 Century

 

[303'505rollin]

Now that's what I'd like to do today, Turkey can wait

 

[87National]

Good morning all. At the JY, opening in 5 min. Website shows a gbody regal, does anybody need parts? I will be browsing the yard for the next few hours.
Edit: my bad, not a Regal, but a 1980 Century

Lucky duck.......wish I could go to the local U Pull It on Thanksgiving.

 

[5spdCab]

It is1230 local time, yard will be chasing people out of here in 30 minutes, and nobody requested parts, so I will take the treasures I pulled for myself, and begin packing tools to head home.

 

[JAMCAR223]

What did you get??

 

[5spdCab]

From the 1980 Century, I got a delay wiper motor, front air dam, one of the rubber accordion tubes for the door electrical wiring (already had one other), and a pair of turn indicators that mount at the top front of the fenders (I have always wanted some of those).

From a 3rd gen Camaro, I found a set of four wheel spacers approximately 1-1/4" thick, and a single aluminum brake drum (the opposite side was a steel drum).
From a Ford Taurus, I got a factory bypass heater hose for my wife's car. I recently had to replace her's. The auto parts store wanted nearly $150 for a replacement hose, which I refused to buy, and instead cut the factory tee out and inserted a plastic replacement tee. Since I was there at the yard, I found one for only a couple of dollars that will go on if I decide to dig into the Taurus engine bay again.

Edit: added photo Friday morning.

 

[DJHull]

I have a 79 Cutlass coupe with the three piece plastic front inner fenders. Ive been serarching for years for the plastic piece of the inner fender that covers the frame at the bottom of the well just in front of the door. It was would be about 8" tall. Thanks for looking!