Hi Guys, I just tried to install my TV Made EZ system on my olds 350/edelbrock 1406, 200r4 setup. So something is going on and I'm unsure what the fix is. It seems like the cable is not long enough which almost never happens accord to bowtie overdrives. Basically when I have the cam setup attached to the carb linkage, the throttle is only at about half throttle with a fully depressed plunger, resting flush against the TV bushing on the transmission. It's supposed to be fully depressed when the linkage is at Wide open throttle, not half throttle which I'm experiencing now. I'm not sure how to fix this, any suggestions? I have pictures but I'm just not sure how to post them up here.
