Which Brake Booster with a 1" Bore MC

[David.C]

I did a quick search for brake boosters being used with a 1" bore MC (aftermarket) and didn't really find any thing. Will the stock booster from a 78 accommodate this? What aftermarket boosters are available to support this application? I was looking at the booster below, but there is not a lot of information. The bolt pattern 3 3/8 square, but I'm a little concerned about linkage.

https://www.mpbrakes.com/accessorie...rs.asp?catid=6FF897C3513C43EC9060A9AB08A490F7

 

[melloelky]

the 78 style booster will not,the one you have in the link is the 82-87 style.that dual diaphragm style will fit the larger of the two boosters found on these cars.
https://www.rockauto.com/en/catalog...72,brake+&+wheel+hub,power+brake+booster,1884

 

[TURNA]

25.4mm thats one inch..... direct bolt in


https://www.ebay.com/itm/ACDelco-18...e=STRK:MEBIDX:IT&_trksid=p2060353.m1438.l2649

 

[O. D. Showtime]

David I have a dual diaphragm booster pulled from a low mile 84 Monte if you're interested.

 

[David.C]

David I have a dual diaphragm booster pulled from a low mile 84 Monte if you're interested.

I'll have to pass on that one, unless it's absolutely cherry.

 

[O. D. Showtime]

I'll have to pass on that one, unless it's absolutely cherry.

PM sent.