Recent content by blizack

Just a question: how did you remove that pressure line? I'm in the process of replacing mine but the bolts on each end are really tight. Any tips on how I can get some more leverage in that tight space?

Continuation of http://gbodyforum.com/viewtopic.php?f=8&t=12225 Starting a new chapter in the 87's life now. From 170k in August 09 to 209k in May 11, the engine is beginning to need more attention. A couple of hits in the parking lot (while I wasn't in the car) has left me with a bent in...

So I was hoping to buy a 350 from a 1993 Cadillac Fleetwood that I found at an auto-repairer's shop. Car was written off due to t-bone damage. When I first saw the car, I told the mechanic I was interested. The car wouldn't run and the dash has a digital odometer. He spends $80, puts on a...

Hey, good catch.

changes in time and money = new plans. 350 in for the 305 maybe upgrade the heads and cam for more power upgrade the rear differential get my cruise control working (4 hour car rides to Toronto every 3-4 weeks) swap grill to 84 Regal grill upgrade exhaust system lower the suspension (cut...

Been a while... School + kid = not much to talk about in terms of the 87. Almost finished with exams, now I am getting ready to buy a L05 out of a 93 Fleetwood. Hoping to place a carb on the originally tbi engine and drop it in.

So using the information from the first few comments, can I swap a 305 sbc to 350 sbc and keep my ccc?

great material guys keep it goin

This is my new favourite car.

I think it would be something like a deck of cards and a freight train

I was just thinking: what kind of maintenance would electric cars need? If I want to save some money on my car I change my own oil and do other work to it. Won't these cars all need a professional for everything? haha which reminds me: even on my mom's Cobalt, you need to reset the computer...

I didn't realize how dirty it was till now lol. I've given it about 2000km of highway driving over the last 2 weeks so its hard to keep up with the cleaning.

Its been a while... School just started for me so I've been busy reading all day long. Anyways, I had fixed the pivot pin problem and now my tilt steering is solid. The car runs well but will need a complete change of fluids from front to back. The weather was good today so I thought I'd...

Just thought I'd mention that I have a Canadian 1987 Buick Regal that has the computer controlled carb.

I know that it seems that with a hole that long, the pivot pin is structurally weakened. My solution to this, since I'm so good at it, is to break a screw off inside of the pin and leave it there. Maybe some 40 years down the road someone will try pulling it off and have as good of a time with...