Recent content by JESSE

carsten.... add more positive caster to your front end.....jesse

Re: 2004r Trans Problem just disconnect the converter wires and road test....if it stops the you know it's the converter.....jesse

I have the relocator brackets and a arb.... i installed them in a effort to keep the front wheels on the ground :twisted: my car leaves straight and i get 1.64 60's.... the brackets change the I/C and i found out that the bottom hole hits the tires to hard so i use the second hole here;s a...

trans My guess would be a stuck valve in the valve body....i've seen some strange things happen with stuck valves.....jesse

10.30 I saw your post when you bought them, it looked like there not under the wheel well?......... post a pic of the side. they look like hoosier drag raidials to me.....jesse

10.30 now you're the one sitting there :twisted: one of my favorite races was with a 8.50 car and i'am running a 13 something.... when he caught me at the finnish at 150mph and his parachute opened ... i was surprised to see my win light came on :shock: a look at the time slip told me i...

trans a thm350 uses the same clutch pack for low and reverse so i would start looking at the linkage and then the valve body... who built you trans ? check with them...jesse

10.30 pass looks like fun to me :twisted: is this the car that you put the arb on? it looks like your old set-up.... if so have you got any vid's on new set up. i really don't think there's much interest on drag racing here, what do you think? i think i'am going to sell the nos...

primed to be sure check your wire on the cap..if the firing order goes clockwise so does the pump my bad i thought a 355 was a chevy :oops: ...jesse something to do is hook up a gauge to see if your making oil pressure....if so move the crank 180 an reprime ...also are your rockers...

primed not trying to be a ******* :shock: your turning your pump the wrong direction......jesse :D

hook up .well it looks like you've got the hook-up 9.75 :twisted: the best one thing was adding anti-roll bar to my car and changing the ic with the bmr relocating bracket's i also found a set of new/used 12 way adjustable qa1's for the front and added lakewood 50/50's on the rear...

switch did you run the purple wire through a relay?...jesse

trans the tv bracket is easy to hook up.....and the height of the intake will not matter..... jesse [/img]

brakes why??

pitman get a pitman arm puller from autozone