My ac finally went out on my old pickup and instead of paying a shop 800 dollars ( which is what was quoted to me) I'd figure I'd tackle it myself. I know I got to replace the compressor, dryer and put a new orifice tube in but is there anything else I would need to check or replace? Its my...
I have a 4150 750 HP on my cutty and I've narrowed it down to me needing to up the air bleed size on the primary to lean the car out at idle. The problem I'm having is no one in the area carry these and they won't get here till Tuesday if I order. Im thinking about drilling out the ones I have...
I've thought it over and when Monday gets here I'm gonna sit down with him and talk numbers and get a look at the books. Its gonna be a big responsibility but with enough hard work and some learning I think it can be done. He has told me that he would help out the first 3 months before he leaves...
Man you guys have given very clear thoughts on this and I know I have a good bit of thinking ahead of me. He has given me a couple weeks to soke it up and that's what I'm going to do. I know I'm gonna need a accountant and I know of one that my uncle uses on his stuff so I'm gonna give her a...
It is truly turn key. We work for 3 of the biggest sawmills in the area and hopefully about to pick up another. Along with the usual customers and the loyal farmers around I wouldn't think I'd have any problems. But as everyone knows that's still a major risk that's either gonna make or brake...
The business is my boss me and another guy. I'm not worried about fishing after work that can come in time. I'm looking towards the future. I love the business, wouldnt trade my job and pay for anything. I don't know much about owning my own place but this opportunity might be to much to pass up.
We haven't gone into specifics with exact numbers or details yet. He was wanting to know on how I felt with the opportunity. Its a machine shop by the way. I know its making money and there is a lot of room to gain new business from what I've seen. He is just wanting to get out of it. He's owned...
Okay guys I was at work yesterday and my boss called me to the office. We talked for about 15 min before he finally got to the point of why he called me up there. He offered me the business. I still don't know what to think about it. This has been my only job since I've started working. I'm only...
I've come to figure out there is no tight budget when it comes to reliable. I'm gonna spring for the system, heater, gauges (both fuel and nitrous) and all the necessary wiring and relays to make sure its done right.
I know I got to have a arming switch but I was thinking about using a push button for activation as I don't want to spray coming off the line to save wear and tear on drive train. Would I need to run a separate fuel pump for the 150 shot or would my pump be enough it's a aeromotive 150 gph at 14...
I've been looking at a lot of nitrous kits and been doing a good bit of research. Can someone point me in the right direction. I'm wanting a wet kit cause it seems better for the motor from what I've been reading. I'm also not wanting to go over a 150 shot. I've been eye balling a nx mainline...
Does it need the Roto joints on both upper and lower in the frame side. What if I used a stock type bushing on the frame side, would that work or would I still have the same issues?
I'm about to start reworking my rear suspension since I've completed the front. I was gonna use my stock control arms and just put poly bushings in them. However I've run across these on summit UPI-301516-R. What I like is that there greaseable and will be stronger than stock. Would it be worth...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.