Search results

i installed a z gate shifter a while back and didnt put the stock shifter brackets back on with it and want to now to get my back up lights to work i misplaced my original ones and the junkyard i go to only has a 80s caprice wanted to know if there interchangeable?

has anyone done this before what cable did you have to use?

I know it needs to connect to the saftey swich on bottom of steering column just not shure which wire at least i think thats were it needs to connect to.

How do i fix my reverse lights so they come on in reverse they only come on in neutral

If any one knows let me now.

I don't know why it sags I put new springs about 2 years ago moog was the brand I noticed it was a little off with my 14 inch tires but when I went to my 15x10 with 275/60/15 it sags big time I've checked the body bushings and suspension bushings and every thing looks good I'm Going to swap the...

Does any one know what other gbody car windshields will interchange with my 1982 regal?

Im changeing out my exhaust on my car and like flowmasters but im not shure if the 10 series will be to loud inside the cabin so im thinking of going with the supper 44 muflers if any one has this set up can you share your knowledge.

Need to test the ohms (the brown wire on the alternator plug) to see if i need to add a resistor when i swap from a si to cs alternator upgrade. Does any one know how to test this with a multi meter i think that what its called?

What size resistor is being used in a si to cs conversion? And how to measure the ohms in the brown wire?

I want to upgrade my original alternator to a cs130 or a cs144. I think im going with the cs144, my 1982 buick regal has the idiot lights on it like temp,brake etc. But none of the idiot lights are hooked up to the engine, and i have aftermarket guages hooked up so in this case i think i might...

I put some 15x10 rims with 295/50/15 on my car and rolled the panels but have to use air shocks to keep from rubing in turns and big bumps. Im wanting to wide the rear quater panels and was looking for some info on this. Ive heard about cutting the inner fender wheel and seperating it from the...

When i take off fast the rpms get real loud like the tranmisson is going to blow up, like its stuck in 1st gear but then it finally shifts. Sometimes ill let off the gas and let it shift over then step back down on the gas it was rebuilt a while back and runs great with normal driveing, do i...

Im going to try and fix my dash thinking of useing bondo with the fiberglass in it to fix the cracks then sand/ruff up the dash and use contact cement and the fiberglassing the dash. Is this the right way of going at it got the info on some of the forms?

Im needing a epoxy that does not get soft with heat, ive patched/fixed the top part of the dash with epoxy works great but with heat it gets gumy but still holds. Needing a good epoxy to patch bumper fillers.

I know the stock rim size its 14 inch but dont know the stock tire size can anyone help?

Im wanting to run 15x10 inch rim with a 4.25 backspace and a 295\50\15 inch tire on my 82 regal i rolled the fender but want to know if the tire will rub on the frame?

Has anyone rolled there back quarter panels on a buick regal because i went to have mine rolled and they told me the steel was to strong and to fix the problem to just cut the steel strip on the inside that cuts on the tire when i hit bumps in the road?

Has anyone ran 15x10 rims with a 4.5 inch backspaceing on a gbody? If yes can you let me know what tire you ran with it?

I have a 1982 buick regal and want to put 15x10 inch rims in the back with a 4 half inch back space and want to know if a 235/60/15,255/60/15,275/60/15,295/50/15 tire will fit with no tire rub issues? It all seems to work on paper but not shure here is the specs. The 235/60/15 tire is 26.1...