Search results

Man i Love It! :D Any for sale yet?

The bottom pic looks like the one on the left is an Eaton, the one on the right looks like an Auburn. I'm looking for one, got to check my axle's but i think I have 26 splines, 86 monte ss. Hope one works for ya! :D

Well the 12-41 in the ring gear is the gear ratio ==3.42 What's the # on the other ring gear??? I might be interested in on if it's a 3.73. Or I could use my gears :mrgreen: What car are you putting these in? What gears do you have???

Whooooa! What a difference in fuel pressure makes! The whole time this things been running on barely enough pressure to idle! Put a higher pressure inline pump, and filter out back, very close to the gas tank. The old inline pump was up front by the engine, had to pull fuel way to far...

Just swapped a TBI 350 in my 86ss, the restriction is in the return line, you have to take the fuel sending unit out of the top of the tank, then you'll see it. It's got a little metal cover over it that you cut out, and then you'll see the restricted return line, just drill it out, and you're...

Re: My 5.3 Cutlass swap finally breathes fire... for realz V Very nice, an ls will most likely be my next swap! Just put a 350TBI in my 86ss, Now drooling over your Cutty! :mrgreen:

Works good when you have the transmission side of the engine mounted, but lift the front off the motor mounts then put the headers in and lower the engine. Sometimes you have to clearance the headers a bit so they don't hit the a arms. Better headers fit without any issues! Good luck!

Been driving pretty good! I've not filled the tank full yet, so no mileage #'s but I've put about 500 miles on it. Guessing it somewhere in the 15 MPG area. I haven't got the tuning cables either. I'm guessing the off idle hesitation is in the fuel pressure. I checked it to find it...

The Look, The Sound! Back in school, class of 97. G-Bodies were everywhere, Cutlass's, Monte's, Regal's, not too many of SS's, GN's or 442's but they were around too. My first car was a 79 cutlass w/ a 260 olds, nice car, but the floor was rotted, from being a Mi. car, so on the way home...

Not sure on the code yet, but it kicked up twice. Both while I left the car running sitting in park after driving around. I'll get to checking it soon. Need to get an air filter, probably tomorrow. The 3.73's get the fan howeling like crazy, at 3,200 R.P.M.'s. About 75 on the highway. Probably...

Whooo Hoooo! Home after the 115 mile round trip today, kicked up a code, but runs Great! I'm surprised myself at how well it runs! 8) Nice cold start idle, No stumbling at stop signs, Just a great running set up! This has been a very low-budget swap, I got thinking about it, and paid $200.00...

Thinking of picking up a set of cables from www.aldlcable.com about 65 buck's w/ shipping. The tuning prog. I've read about alot different downloadable options??? Not real sure yet, open to options on anything, the cables mentioned are the only ones I've found??

I noticed this runs better with alot of advance timing too. Planned on getting it running hopefully well enough for some summer fun, and then probably gonna go through it. But the swap is basically done, and that was the tricky part!

Very Nice Work! Congrats! :mrgreen:

Here's a couple pics of the engine. Tried to get a pic of the tight spot on the pass. side header. Tomorrow morning is gonna be the big test. First drive any major distance, it has been around the block a few times in the last few days! You can see the fuse/relay box that came out of the...

http://www.ebay.com/itm/150623432093?ss ... 1439.l2649 thats a link to the headers i used, if it works. Picked them up on ebay, I guess they are considered shortys, not mid length as I stated before. I've ran into headers that hit the A arm before, on the passenger side, these do as well...

Swapped many engines in the past, even got an Accel Super Ram Big Block Chevy E.F.I. in my 79 Cutlass! However I've never hacked into factory wiring this far to do a swap. I picked this Monte up year ago now was all original, but toasted the 305HO late last summer. So did some looking and...

Hopefully problem solved for free! just saw on thirdgen forum that the factory speedo vss that i have is already the right signal. Too Cool! Off to the garage for an hour or so! :mrgreen:

Done quite a bit of research into this, and wishing JTR would answer an e-mail at the very least. I picked up the Chevy TPI/TBI book by JTR. The older copy of the book I got, dosen't cover the 95 ECM's, however On-Line it looks like they have what I need. Just wanted to make contact, to be...

I'm using the stock 200 4r. The donor setup is out of a 95 Z-71w/ automatic. Thanks for the replys I'm sure I'll be around her alot more, getting the bugs worked out! Yeah I need to get the 4th gear lock-up hooked up also. It's time to go play in the garage! :D