Cutlass Project

[fraido2002]

Thats a 80-81 cutlass steering wheel or mid 80's toronado. The toronado had a little diferrent horn center in the mid 80's. Some of the wheels, not sure of the break down of how or which, were foam and some were leather.

 

[GT_80]

do you know approx how many sq ft of dynamat you used on the floor in the car?

 

[bugsyroo01]

Thats a 80-81 cutlass steering wheel or mid 80's toronado. The toronado had a little diferrent horn center in the mid 80's. Some of the wheels, not sure of the break down of how or which, were foam and some were leather.

I want a steering wheel like that and a set of 81 tail lights

 

[fraido2002]

do you know approx how many sq ft of dynamat you used on the floor in the car?

Well, I bought two boxes of the dynamat extreme bulk pack which is 36 square feet. I've used one box plus two sheets out of the other box. I plan on doing the sides and the roof as well. I don't think I will have enough to make it to the trunk. Hopefully there is enough to do the doors though. That's all to come.

 

[fraido2002]

Great News!!!!!!! My rims and tires came in today. Four 18x8 boss 338's with bridgestone Potenza RE970 AS pole position. Fronts are 245-40/18 and rears are 265-40/18.











Its still on Jackstands so that's why is looks like it is sitting high.

 

[79KScutlass]

really enjoyed running through your overhaul today, keep it up! awesome.

 

[fraido2002]

Got it off the jack stands to check ride height, not too bad, still needs some glass and interior, so it should sit a little lower.

 

[fraido2002]

I also recieved my new lower door panels and carpet from gbodyparts. I opened up the holes in the door panels to fit my 6.5's. Turned out pretty good.

 

[littlerascle59]

Looks great!

 

[fraido2002]

It's official the brakes are finally done except for a small leak off the distribution block.