Frame issue or wrong mounts help

[Blazenlotus]

Ok so I was trying to put the solid motor mounts on my frame today. I was working on the passenger side first. When I put the bolts in I noticed the bottom of the mount was off the frame. Then I got to looking at the frame and seen that on both sides it kinda has a crease. Is this a problem anybody else has had? I don't know if the frame is messed up or whats going on. Here are the pictures to try to show what I am talking about. Am I using the wrong holes?

Here is the drivers side you can kinda see the crease its by the long hole.

 

[mebe007]

thats how mine were. engine bolted in and lined up fine. i ended up going poly this go around though

 

[cutlass79]

are u droping in a chevy if so u got it right thats ho mine as

 

[Blazenlotus]

Ya I am going to put in a 454 in it. I thought maybe thats how it was but a buddy of mine has an el camino with them and his lays flat.

 

[mebe007]

mine layed flat but they hung off the edge like that

 

[Blazenlotus]

I know they are supposed to hang off its that bottom part up off the frame that I am worried about.

 

[gpguy]

could have been a bad day at GM? maybe somebody dropped a motor in it? I never seen mounts not sit flat :?:

 

[Blazenlotus]

could have been a bad day at GM? maybe somebody dropped a motor in it? I never seen mounts not sit flat :?:

And that is what I am worried about. I hope I don't have to start looking for a new frame.

 

[pontiacgp]

if you remove the lower control arm you should be able to get a drift punch in that area to get rid of the depression