Lot of G Body Hardware

[joesregalproject]

Hey everyone, I've got a TON of hardware leftover from my Regal. Lots of it. It is all metric and none of it is compatible with my Skylark, so I'd like to sell it to someone who needs it. This stuff is used, but it would all clean up and be very usable.

Lots of body bolts, nuts, screws, etc. Coarse and fine thread. Of note are brake booster nuts, one hood strut bolt, two windshield wiper motor bolts, headlight bezel screws, several AC box screws, fuel line clamps, sway bar bracket bolts, door hinge bolts, etc. Would like to get $50 plus shipping for everything.

 

[weekender]

Do you have the seat frames that the bucket seats are mounted to, then to the floor pan? Weekender

 

[justdandy]

Hey everyone, I've got a TON of hardware leftover from my Regal. Lots of it. It is all metric and none of it is compatible with my Skylark, so I'd like to sell it to someone who needs it. This stuff is used, but it would all clean up and be very usable.

Lots of body bolts, nuts, screws, etc. Coarse and fine thread. Of note are brake booster nuts, one hood strut bolt, two windshield wiper motor bolts, headlight bezel screws, several AC box screws, fuel line clamps, sway bar bracket bolts, door hinge bolts, etc. Would like to get $50 plus shipping for everything.
View attachment 232520 View attachment 232521 View attachment 232522 View attachment 232523 View attachment 232524 View attachment 232525 View attachment 232526 View attachment 232527 View attachment 232528

I'm looking for the little chrome knobs on the lower backrest to release the latch and let the back fold. just the 2 buttons. let me know here or e-mail thanks

 

[cschum]

Hello, is this lot still for sale?

 

[joesregalproject]

Hello, is this lot still for sale?

Yep.

 

[cschum]

Yep.

Ok, I have an 83 cutlass supreme and I think I accidentally sold my bag of bolts for the front headlight/grille assembly, the bolts that secure it to the fenders and core support. Luckily I happen to have one left, but they are very hard to find any information on online. Anyways, the 4 bolts + 1 stud in your 8th picture (2nd to last) in the "3 piece" section of the bin look to be what I need. Where they have the 2 different width threads and a 10mm hex drive. I would buy the lot if they are correct (the rest of the bolts also look familiar so I could use them eventually)

Could you please measure them for me? Because I'm afraid they are slightly skinnier than what I need.
What I need:
30 mm overall length including head (not super important)
0.25 inch diameter of smaller thread
0.29 inch diameter of taller thread
Thanks,

 

[joesregalproject]

Ok, I have an 83 cutlass supreme and I think I accidentally sold my bag of bolts for the front headlight/grille assembly, the bolts that secure it to the fenders and core support. Luckily I happen to have one left, but they are very hard to find any information on online. Anyways, the 4 bolts + 1 stud in your 8th picture (2nd to last) in the "3 piece" section of the bin look to be what I need. Where they have the 2 different width threads and a 10mm hex drive. I would buy the lot if they are correct (the rest of the bolts also look familiar so I could use them eventually)

Could you please measure them for me? Because I'm afraid they are slightly skinnier than what I need.
What I need:
30 mm overall length including head (not super important)
0.25 inch diameter of smaller thread
0.29 inch diameter of taller thread
Thanks,

They are at my storage unit but I'll stop by and measure them tomorrow.

 

[scarborough]

looking for a set of tan seat belts for a 87 olds with bucket seats

 

[Zelnak Zilla]

Geez... I can identify by sight nearly every fastener shown, and where they're used. Clearly I've been playing with G bodies too long. Ha!

 

[cschum]

They are at my storage unit but I'll stop by and measure them tomorrow.

Were you able to get to your unit? Or is that not gonna work?