Hey guys. Where can I find a shroud for my stock (for now) Malibu 79 Classic coupe. Can some one point me in the right direction. I would like a plastic one.
Thanks Dez
Thanks Dez
MALIBU Shroud
- Thread starter Dezimade
- Start date
- Status
The 1970 Chevelle has a nice looking plastic shroud. The bigger V8s use a wide radiator that matches your photo. I am not sure of the fan diameter.
Feel like paying a wopping $1083 for an NOS unit from ebay? 
not mine - https://www.ebay.com/itm/3843931222...d=link&campid=5335822911&toolid=20001&mkevt=1
not mine - https://www.ebay.com/itm/3843931222...d=link&campid=5335822911&toolid=20001&mkevt=1
Thanks John I got a cold case in there. Yes but where do I find this holy grail of car parts. I can’t seem to source it. Thanks Dez
ih dear. Me either!! .Feel like paying a wopping $1083 for an NOS unit from ebay?
not mine - https://www.ebay.com/itm/3843931222...d=link&campid=5335822911&toolid=20001&mkevt=1
A slightly later one '81 up should fit, as long as it came from a 305 car. Not sure on the 307 Olds engined ones, if they are the same.
Guessing '78 - '80 Chev would be the closest to original for the OP's '78. Monte Carlo did use some of the same front clip pieces as the Malibu. Believe radiator support and shroud are two of them. Inner skirts, probably also.
The '78-'88 SBC cars all interchange with the shrouds. Olds do fit. Not 100% on the Pontiac. Outside of cosmetic differences for model specific needs all the rad supports can interchange but may need holes or trimming for proper fit of things like harness routing, header panel/headlight pocket clearance. '78-'80 Montes & '78-'87 Malibu/El Camino use the same inner fenders.
Cutlass V8 shrouds will fit all Gbodys. As a matter of fact. All shrouds that came in
a Gbody will fit in any Gbody.
timo22
a Gbody will fit in any Gbody.
timo22
- Status
