Tilt Steering Coumn Repair in So Cal?

[19cutlass79]

If you have the time to do it your self I used this article to do mine, the slop is usually due to the three srews in the column that come loose over time. Hope this helps. I loc tite'd mine so I pretty much never have to worry about it again :lol:

wade

http://www.superchevy.com/tech/sucp_0707_tilt_steering_column/index.html

 

[joe_padavano]

X2. This is a really simple repair if you have the steering wheel puller and lock plate compressor. That's a good article. Here's basically the same process with different photos:

http://buickperformance.com/tiltsteerin ... wobble.htm

 

[tc1959]

Re: Tilt Steering Column Repair in So Cal?

X2. This is a really simple repair if you have the steering wheel puller and lock plate compressor. That's a good article. Here's basically the same process with different photos:

http://buickperformance.com/tiltsteerin ... wobble.htm

You will need a pivot pin tool also, and dont forget to loctite the screws.