Latest activity Postings Media About
-
-
How are you getting power to your fuse box and ignition switch if you don't have fusible links from the starter? The purple wire won't... -
383_StealthRam replied to the thread How are you wiring your dual electric radiator fans? Without external fan controllers, using LS PCM.I'm not an expert (with hands on for) the Intrepid fans wiring, but from what I've researched on your behalf what you've outlined...
-
383_StealthRam reacted to Sweet_Johnny's post in the thread stock 1979 regal rubberized wheels any value? or throw away? with
Like.
No idea but it's cool that you have them because too much stuff has been lost to the crusher. -
The second fusable link wire is spliced from the factory to three circuits and goes to the Hi blower relay for the A/C, to the alternaor...
-
ELCAM is right on the mark. In the manual toward the beginning of the schematic section there is a breakdown of the C-100 connector. It...
-
Yes running headers and still need to get a heat blanket for the starter. Thanks for the help
-
383_StealthRam replied to the thread Starter wires.In my opinion do yourself a big favor, especially if you've already refurbished/rewired your C100 bulkhead connector and that is to...
-
-
383_StealthRam reacted to pagrunt's post in the thread What did you do to your shop today? with Like.
Now you start the quest to fill those draws with tools you may or may not use in you life time. Choose wisely & avoid the tool trucks.
-
-
10,000 mile guarantee!
-
383_StealthRam replied to the thread Funny Car Related meme's.
-
-
383_StealthRam replied to the thread BUILD THREAD 1987 Olds 442 Project Build.Ah, ok that makes sense. I like the idea of roll over valve!
-
383_StealthRam reacted to oldsofb's post in the thread BUILD THREAD 1987 Olds 442 Project Build with Like.
I'm using a simple tank vent at the rear coupled with a "roll over" valve
-
383_StealthRam replied to the thread BUILD THREAD 1987 Olds 442 Project Build.Just out of curiosity, why aren't you using the EVAP canister to provide vent for gas tank, and carb bowls if equipped?
-
383_StealthRam reacted to oldsofb's post in the thread BUILD THREAD 1987 Olds 442 Project Build with Like.
Since I'm not using the evap canister, I decide to replace it with a vacuum canister instead of the factory ball canister. This way...
-
-
Loading…
-
Loading…
-
Loading…
