Recent content by clean8485

  1. C

    BUILD THREAD “The Juggernaut”

    Its an amazing process Donovan. The results speak for themselves. Looks really good. It will make your work much easier now. I had some rusty parts that I needed to get cleaned up last year, so I decided to try the laser process. I took them to a guy just east of Toronto. I asked him how the...
  2. C

    '78-'79 Malibu SBC oil pan/dipstick question.

    No problem 79 USA 1. As nearly as I can figure, GM only used that setup for 2 model years (1978 & 1979), so I knew it would be a hard item to find. I appreciate your help.
  3. C

    Space City 1982 GP Build

    Thanks Jared. Looking forward to the continuation of that project.
  4. C

    Sean's 78 Camaro Z28

    Hey Jared, I hope I haven't missed anything, but do you still have your Grand Prix?
  5. C

    '78-'79 Malibu SBC oil pan/dipstick question.

    No problem Sweet_Johnny. Thank you for looking. I appreciate the help.
  6. C

    '78-'79 Malibu SBC oil pan/dipstick question.

    Thanks very much 79 USA 1. If you find that dipstick and tube, please let me know. I've been fighting a spring cold since Friday, so not checking in often. I did consider the older style manifolds, but they don't really go along with the "look" that I'm trying to achieve for the engine bay in...
  7. C

    '78-'79 Malibu SBC oil pan/dipstick question.

    Thanks melloelky, but even the universal dipstick tubes won't work for what I'm trying to do.
  8. C

    '78-'79 Malibu SBC oil pan/dipstick question.

    Thanks Sweet_Johnny. I have considered the newer style dipstick. Usually though (on most of them anyway), there's a plastic piece at the lower end of the dipstick with the "full" and "add" marks on it, and I'm not sure about the length of that plastic piece trying to make it through that bend in...
  9. C

    '78-'79 Malibu SBC oil pan/dipstick question.

    Thanks for the info Pagrunt. I've been trying to see if I could fabricate a dipstick tube, but the tube needs to bend at about a 45 degree angle right after it comes out of the oil in the deck surface of the block, and withat kind of angle, the dipstick doesn't want to make that bend.
  10. C

    '78-'79 Malibu SBC oil pan/dipstick question.

    I'm attempting to swap a 400 SBC into an '88 Caprice, using late '80s 350 F body exhaust manifolds. The problem I'm running into, is that the outlet on the F body exhaust manifold sits directly in front of the hole for the oil dipstick tube on the 400 block. Years ago, I owned a '79 Malibu with...
  11. C

    BUILD THREAD “The Juggernaut”

    More nice work Donovan. Your patience continues to amaze me. The variety of tools and different grades and types of discs as well. Some of those discs aren't cheap either. I recently purchased a couple of Roloc bristle discs, for cleaning off gasket surfaces, and those little 2" diameter discs...
  12. C

    BUILD THREAD “The Juggernaut”

    Any more progress on the Juggernaut Donovan?
  13. C

    Auto to manual swap

    Red Loctite on the bolts would be a wise precaution.
  14. C

    Finally together

    Nice car! Nice tucked bumpers too!
  15. C

    BUILD THREAD “The Juggernaut”

    Great work as always Donovan! Although most people will see your fabricated piece on the car when its all finished, I think that most people will think that it came from the factory that way. That blue is a beautiful colour too!
See more

Please support GBodyForum Sponsors

Classic Truck Consoles Dixie Restoration Depot UMI Performance

Contact [email protected] for info on becoming a sponsor

Top Bottom