Recent content by oldscutt85

  1. O

    700 r4 shift problems

    The engine runs great,i just gave it a full tune up, could it be a bad TV cable?
  2. O

    700 r4 shift problems

    it was the wires that go to my ign coil, i also noticed that ever since it stopped shifting the idle was a bit higher and also goes into gear the truck bounces forward
  3. O

    700 r4 shift problems

    yes but once i hit 35 the saftey kicks in and it goes into second
  4. O

    700 r4 shift problems

    I have a 1990 blazer with a 350 tbi and a 700, the other it stopped shifting so i figured due to the lack of maint. from the previous owner i did a simple fluid and filter change. i checked all the wiring to the selenoids and they were fine, i put it all back together with no luck. A few days...
  5. O

    G Body Car Club for Jacksonville, NC

    yea their still their
  6. O

    your rims

    i love that stance on ur car what size rims are those? 17x? and what lowering kit did you use?
  7. O

    G Body Car Club for Jacksonville, NC

    im down ill pcs to jacksonville in october
  8. O

    engine swap while on 14 days of leave(UPDATE!!!)

    well im going on leave again soon and the oldman has been buisy getting my car ready for me so i can enjoy it this time, recently bought a champion aluminum 3 row radiator custom mounts the oldman made just missing fans any ideas of what i should go with i was thinking f-body electric fans
  9. O

    3 row or 4 row radiator help

    im going on leave in 2 weeks and i need to order my radiator, problem is i dont know wich one will fit. the 3 row is19" High (top of cap) x 27" Wide (Incl. Brackets) Upper INLET: 1-1/2" located on the DRIVER side. Lower OUTLET: 1-1/2" located on the PASSENGER side...
  10. O

    No brake pedal with engine on. Help!

    i would go back and recheck the springs on your break shoes just to be sure there installed the right way
  11. O

    Lets see those...

  12. O

    just one more inch

    if your using new motor mounts the block might need some tough love getting into place, thats how mine was when i did the v6 to sbc swap.
  13. O

    olds 350 cam question

    if he really wants a cam i would go with an rv cam just give it a lil more bang for the buck,or if he wants that big cam sound i would go with a thumper cam they sound like a big cam but u still get great street manners
  14. O

    steering column has a lot of play

    so the last time i was home i did the engine swap on my 85 cutlass and i had to remove the steering shaft just to make installing the headers a bit easyer,it was stuck in place so i had to take a hammer to it to pop it off.long story short i was about to fire up the car for the first time and...
  15. O

    70-72 chevelle center consle in 85 cutlass

    has anyone ever done this befor? im asking since iv been trying to find a centter consle for some time now with no luck and since were im at i cant go to junkyards.does any one have pics of this?

Please support GBodyForum Sponsors

Classic Truck Consoles Dixie Restoration Depot UMI Performance

Contact [email protected] for info on becoming a sponsor