3rd brake

I do have a lot of odds and ends. I am in no way a hoarder. I started collecting parts from the yards to help guys get parts they needed to fix up their cars. That’s how I always fixed cars up growing up. I know a lot of guys didn’t have access to the yards in the bigger cities.
When I came across a gbody at the yard, I would get anything of value BEFORE they got crushed. And usually within a week or two, it was gone. Had some health issues over the past several years but have the time to start going through stuff.lol
timo22
 
I modified a third brake light and added a socket to use a single full size LED bulb instead of the grids they sell since my housing melted from a standard bulb
 
Last edited:
I modified a third brake light and added a socket to use a single full size LED bulb instead of the grids they sell since my housing melted from a standard bulb
I believe I have a second 3rd brake light and the stuff to make another of the 3 little boards I put together to do mine
 
Sounds like the perfect one to modify
Im Ready Doc Brown GIF by Back to the Future Trilogy


Although I am going to have to go back and work on mine, I believe some of the LED's in the boards I put on failed already. But was still a much better deal than what they are charging for the one that fits. Since mine was an 84 I had to put it in because to me I always liked the look of those 3rd brake lights
I figure if I can just get the needed bulb holder/reflector a Super Bright LED would be used.
 
  • Like
Reactions: mclellan83
I want to install one upside down in my el camino, flip the rubber grommet around and all to match contour, some kind of mounting base, etc. I imagine it looking great if it can look factory, or really stupid, but I gotta try at least.

Do you mean to hang it from the ceiling?

I've thought of doing something similar with the Mustang -- by modifying a resto-mod CHMSL sold for '67 Mustang coupes -- but in a mockup I didn't like that when hung from the ceiling of the fastback roof it would potentially block a good chunk of the view in the rearview mirror. Once I get back to planning that project I'll be investigating LED light bars, maybe something stuck to the window.
 
I had to buy a replacement rear window with defog for my 87 442, soooooo.....I accidentally bought a 1985 version. Oops 😁

Hutch

Same here but I just wanted the window replaced as there was a bad gasket after the fire so I took what Safelite gave me. Interestingly enough, per AACA rules it'd be a 3-point deduction when a Perfect Car has 400 points (assuming the judges know enough to notice the difference)
 
Way back when I had saved a light mount from a lates 80s gm something and planned to install it in my 84. It was more of a thought of safety for me. Anyway plans changed when I found a led 3rd brake lite bar on the top of a suburban at a junkyard. I wanted it under the rear wing. Found that the firebird wing was hollow so to run a wire inside from the center over to a pestal. Ran one wire to the brake switch and ground wire in the trunk.
 

Attachments

  • IMG_2549.jpeg
    IMG_2549.jpeg
    664.4 KB · Views: 28
Do you mean to hang it from the ceiling?

I've thought of doing something similar with the Mustang -- by modifying a resto-mod CHMSL sold for '67 Mustang coupes -- but in a mockup I didn't like that when hung from the ceiling of the fastback roof it would potentially block a good chunk of the view in the rearview mirror. Once I get back to planning that project I'll be investigating LED light bars, maybe something stuck to the window.
Indeed
 

GBodyForum is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com. Amazon, the Amazon logo, AmazonSupply, and the AmazonSupply logo are trademarks of Amazon.com, Inc. or its affiliates.

Please support GBodyForum Sponsors

Classic Truck Consoles Dixie Restoration Depot UMI Performance

Contact [email protected] for info on becoming a sponsor