I'm new and I'm already apologizing...

307cutlass

n00b
Feb 11, 2025
3
8
3
47
So hey guys (gals, maybe? gotta be at least one)

my username denotes the car/engine I once owned. Yes, that'S correct. And that's why I'm apologizing, I admit that I had to sell the car in 2007 to buy another car because my parents had no room to keep it. In hindsight, you know, I was dumb. As Artie Fufkin in Spinal Tap would say : Kick my a$$, Kick this a$$ for a man, wontcha?". Lesson learned. NEver buy anything precious again of you can't keep it. All this being said, I have two questions for you. But before, because I know we're all lookers, I will grace you with a picture (or two) of my beloved Cutlass Supreme Classic. Good times. If only those times could be now.
Owen's_cutlass.JPG


So, one of my questions is, has anyone seen this car (possibly) in and around Ottawa, Ontario, Gatineau, Qc? It was all stock when I sold it for the measly sum of 350$.
 
And about how long ago was that?


Nick
Oh gosh... let's see, I sold it in the summer of 2008, if I recall correctly. The person I sold it to was going to use it to park in front of a house he was building to discourage theft (of the house)

The engine had a serious crankshaft knock, it was said to be a bad bearing, I put 20W50 in it. it had about 185000km on it.
 
That's a nice ride and it's a shame you had to sell it. Hopefully someone can at least provide some pictures or a story about what became of it.
 
Sorry, haven't seen it lately...maybe it's been recycled?...

1739532554968.png



1. Never apologize for owning a G-body. It's what was available from GM mid-sized for an entire decade and the only real reason they were so "popular" IMO was because they owned a majority of U.S. marketshare. They had to. U.S. car companies fought hard against "imports". Had the foreign invasion got rolling steam in the early 80s, things may have been different. Thank goodness that didn't happen.

2. Chances are very low that in the last 17 years someone took proper care of a $350 bargain basement car purchase with a bad engine. Someone sneezes and you have rear frame rot and rusty quarter panels. Someone attempts to sneeze and your snake blinder clips crack/break and lose your lower trim. Never say never, as there's always hope.

3. Too bad you couldn't have kept that car. But there's always one somewhere. Not for $350 most likely, but you can still get one if you're determined.
 
Kay-Bec, uhm?? Hate to suggest it but there is a good chance that your lost love ended up as the foundation for a dirt track build at some local 3/8 mile bull ring. The G-bodies were popular for that because they could be had for cheap and were easy to strip and modify.

Going back a couple of generations, it was the tri-5 Chevvies that were popular for the same reason; available for cheap off a used car lot and easy to convert. Moving forward a generation it was the 64-72 Chevelle et al A-body that got the same treatment and suffered the same fate.

My neighbor back then actually made a New Years run down to Duluth to pick up a 67 GTO from a salvage yard down there. All they had for him was the frame and body and not much else. He built a late model out of it for the local track. Not sure what became of it; think the body was tossed and a more contemporary one built out of sheet aluminum, then the frame got back halfed and finally it was tossed in favor of a pro-built chassis. which also disappeared along with the race deck that he towed it to the track with. Might still be rusting to death somewhere around here, but no one from the generation left around to ask.


Nick
 
Sorry, haven't seen it lately...maybe it's been recycled?...

View attachment 252030


1. Never apologize for owning a G-body. It's what was available from GM mid-sized for an entire decade and the only real reason they were so "popular" IMO was because they owned a majority of U.S. marketshare. They had to. U.S. car companies fought hard against "imports". Had the foreign invasion got rolling steam in the early 80s, things may have been different. Thank goodness that didn't happen.

2. Chances are very low that in the last 17 years someone took proper care of a $350 bargain basement car purchase with a bad engine. Someone sneezes and you have rear frame rot and rusty quarter panels. Someone attempts to sneeze and your snake blinder clips crack/break and lose your lower trim. Never say never, as there's always hope.

3. Too bad you couldn't have kept that car. But there's always one somewhere. Not for $350 most likely, but you can still get one if you're determined.
That did make me laugh... Anyway, I guess anything's possible, including your three hypothesis. ses. however it's spelled. Thank you for all the nice comments, I really did like the car. However, it did "drive" me kinda nuts until I figured out it had the Torque converter clutch "No-Release" problem. I have to thank the internet for that one because I found info on a forum where some guy found the problem himself and I realized that's exactly what was happening to my car. 250$ later the car behaved properly, now I had a decent college car. Come to think of it, I had a badass car. Ah, nostalgia.

Now it's time to tell you the other reason that brought me here, and you're probably going to shake your head at me for this one.

Because of the constant feeling of regret I self-imposed myself with by putting this very picture (it's a scan of two 35mm pics, the originals are on my welcome wall of my apartment) on my second screen at work, I tell myself "one day". I think a lot of us think about this "one day" feeling, and with the way things are going, (complete the lyrics here for you older people - I count myself in there), well someday may never come. So I scour the 'keej (you Canucks know what I mean) for a reasonable deal. And that'S when I found this : (I was going to provide a link but I'm scared I may be creaking a rule here - too lazy to go check) a 1969 Olds Cutlass convertible for 4000$. I figue if I'm going to spend money on a cutlass, it might as well be a true "classic" model. Something to make your nephew go "wow uncle, your car is way cooler than any other car on the road" LOL

Yeah, 4000$ now downmarket to 3000$, it must be in bad shape you think. Well you think right, because I ended up calling for info and basically the frame is rotting, and this is the opinion of a gentleman who seemed to know what he was talking about, and even though he was not proclaiming to be knowledgeable about Cutlasses, he said I'd be wasting my time driving seven hours to go see what seems to be a wreck. The pics (search for 1969 Oldsmobile Cutlass convertible on kijiji - it's near Sault-Ste-Marie, and it's red, you'll know when you see the ad) show a red cutlass with the seats removed, a tarp hiding most of the car, and the guy (who does not own it by the way, but knows the owner) says "it"s more than project, it's more of a parts car".

All this to tell you that I came here to alert all you cutlass fans that if you're looking for a project and you hate to see this things go to waste, well hey this might a project for you. a BIG project! I mean, can it even be done to remove the body off a frame without wrecking the rotting frame? And then do what, rebuild a nw frame? Either way, I changed my mind about the car obviously, but thought maybe some of yous may be interested. Yes, I know, it's NOT a G body car. This is what I realized AFTER I BECAME A MEMBER.

tomatoes/sighs of disappointment welcome.
 
Last edited:
  • Like
Reactions: Sweet_Johnny

GBodyForum is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com. Amazon, the Amazon logo, AmazonSupply, and the AmazonSupply logo are trademarks of Amazon.com, Inc. or its affiliates.

Please support GBodyForum Sponsors

Classic Truck Consoles Dixie Restoration Depot UMI Performance

Contact [email protected] for info on becoming a sponsor