Search results

  1. monte olrac

    BUILD THREAD “The Juggernaut”

    that metal work is too pretty to cover up!
  2. monte olrac

    over flow tank not working

    does the tank have a vent?
  3. monte olrac

    Is this harmonic balancer cover with timing marks fitted correctly on my 305 8" balancer ?

    while your waiting for that tape, paint a line from the outer to the inner ring of the dampener so you know if it ever does slip
  4. monte olrac

    replacement front windshield

    i had one of those! i felt great but then i realized it took 1.2 seconds to open it with a harbor freight screw driver
  5. monte olrac

    Is this harmonic balancer cover with timing marks fitted correctly on my 305 8" balancer ?

    remember with the timing cover off and your timing set at dot to dot you timing is 180 degrees out fyi
  6. monte olrac

    Is this harmonic balancer cover with timing marks fitted correctly on my 305 8" balancer ?

    i cant tell by looking at it if its good or bad, easy route to go is bring it to a auto parts store and check it against a new one
  7. monte olrac

    Is this harmonic balancer cover with timing marks fitted correctly on my 305 8" balancer ?

    a stock harmonic balancer has 3 parts : 1outer ring the, 2 rubber material between the inner hub and outer ring (dampening material) , 3 inner hub. the rubber can deteriorate over time causing the outer ring to slip thus moving the timing mark
  8. monte olrac

    Is this harmonic balancer cover with timing marks fitted correctly on my 305 8" balancer ?

    if its a old stock balancer it could have slipped over the years, i would check against a stock replacement or just buy one with the marks on it already
  9. monte olrac

    PONTIAC New on site

    well what i did for mine was i used 28 spline mouser axles, i used a take off 3.42 gear set set from a 2000ish camaro, also did the camaro rear disc brake upgrade cast aluminum cover solid pinion spacer and spherical bushings with south side machine upper and lower control arms heres a couple of...
  10. monte olrac

    Carb Stalling Troubleshooting...Flooded ?

    are those plugs oily? beside running rich you may have a valve seal issue and no amount of tuning is going to clean that up,
  11. monte olrac

    Stock 305, thoughts on 3” tubing?

    Even an ho 305, still has ridiculous low hp, that unless for sound or if someone decides to add an power adder exhaust isnt going to change anything that you will notice. assuming asking about the exhaust i feel future upgrades are probably going to happen with his build
  12. monte olrac

    Stock 305, thoughts on 3” tubing?

    i would go with 2.5" duals with a x or h pipe its not going to kill the 3-5 performance (mainly because 305 and performance dont really mix) but if you ever decide to upgrade engines you will be able to support well over 400 with that setup.
  13. monte olrac

    Has the General become Boring?

    In my opinion i think most of the vehicles out now all look a like within the same class, with the exception of mopar
  14. monte olrac

    Windshield washer too powerful?

    as slow as Gbody wipers are, you might have lucked out
  15. monte olrac

    GBOTM VOTE - July '21 - El Camino / Caballero

    to bad i was too late to enter:cry:
  16. monte olrac

    McRib Returns December 2, 2020

    this is why people are hoarding toilet paper this time!
  17. monte olrac

    Stupid things buyers/sellers do

    sellers/thieves that post wheels without telling you the bolt pattern or at least what year model they stole /came off of!
  18. monte olrac

    Need input on carb..

    sounds like too much timing, you need to back it off some!

Please support GBodyForum Sponsors

Classic Truck Consoles Dixie Restoration Depot UMI Performance

Contact [email protected] for info on becoming a sponsor