07 monte interior swap to 87 monte

[FE3X CLONE]

F-body seats are a direct bolt-in. '93-'02

*Edit* The front seats are a direct bolt in. For the rears you could just have your stock seats recovered to match.

 

[gotmonte]

F-body seats are a direct bolt-in. '93-'02

*Edit* The front seats are a direct bolt in. For the rears you could just have your stock seats recovered to match.

Camaro or Pontiac FireBird?

I LOVE the TA interior but the Camaro lacks biiiig time

 

[gbodyera]

Im not sure but Im getting ready to find out as I just got a response on CL with an exact yell./black pair. Ill let ya know.

 

[FE3X CLONE]

F-body seats are a direct bolt-in. '93-'02

*Edit* The front seats are a direct bolt in. For the rears you could just have your stock seats recovered to match.

Camaro or Pontiac FireBird?

I LOVE the TA interior but the Camaro lacks biiiig time

F-body, as in BOTH Firebird or Camaro. 😉

 

[T-TOP TONY]

so f-body seats fit rite on with no mods?

 

[FE3X CLONE]

so f-body seats fit rite on with no mods?

Correct. You just swap the seat brackets from your stock buckets over to the F-body seats and bolt them in.

 

[T-TOP TONY]

so f-body seats fit rite on with no mods?

Correct. You just swap the seat brackets from your stock buckets over to the F-body seats and bolt them in.

oh ok cause i wanted to swap them, but with the power seat track too

 

[gotmonte]

Hmm ok. I know the Ta's interior are a lot more bulky and much more comfortable.

I may have to go that route if there is no modification needed.

So you just UNBOLT YOUR OLD SEATS, AND BOLT THE FIREBIRD SEATS IN WITHOUT ANY PROBLEMS?

If so, I am going on the hunt right now

 

[FE3X CLONE]

You unbolt your seats, remove the seat tracks from your old seats and transfer them over to the new seats. Then bolt the F-body seats in place.

You could use the stock F-body seat tracs but they would need to be modified (cut and welded) to fit the G-body. If I remember right, they are the correct width but aren't long enough to line up with the other set of studs on the floor.

 

[gotmonte]

Very cool!

I wonder if the console would bolt up too? That would be just too easy wouldnt it. lol.

Maybe though? Any thoughts on it?