1985 Cutlass Supreme - I Have Question And Need Your Answers

Status
Not open for further replies.

Six_Legal

Not-quite-so-new-guy
Oct 4, 2012
25
0
0
36
Greenville, North Carolina
Any ideas of what you would do for a 1985 Cutlass Supreme share here . I need some input . I'm lookiing to make it fast but not drag racing fast . Thanks Guys
 
Re: Project Ideas for 1985 Cutlass Supreme

If you can find a Buick 350, it is supposedly a direct swap. All your accesories, mounts etc swap over. You may need a new rad, cheap new aluminum/plastic one should do. A BOP TH350 is a direct swap, if you have a TH200C in there. It won't last with more torque behind it.
 
Re: Project Ideas for 1985 Cutlass Supreme

I would go with a 4.3 vortex to save gas in it for one. Or a 5.3ls if you still want av8 . Drop it like two inches maybe three in the rear. Put some nice 18 inch wheels on it with some fat t*ts in the back. Tint all the windows like 5%.
 
Re: Project Ideas for 1985 Cutlass Supreme

olds307 and 403 said:
If you can find a Buick 350, it is supposedly a direct swap. All your accesories, mounts etc swap over. You may need a new rad, cheap new aluminum/plastic one should do. A BOP TH350 is a direct swap, if you have a TH200C in there. It won't last with more torque behind it.
X2.......he can just find a stock gbody v8 radiator & shroud also.
 
Re: Project Ideas for 1985 Cutlass Supreme

I would say go with the Buick 350, it is a fairly straight forward swap. For the transmission either a TH350c or a 200r4 again relatively simple (the TH350c more-so). Swap the rear gears (or the whole read end) for a 3.08 if you go with the TH350C or 3.42 or 3.73 with the 200r4. Don't forget to make it a posi. Finally throw in some suspension, steering, and brake mods.

For the Buick 350 swap, I would start by reading these two threads:

http://gbodyforum.com/viewtopic.php?f=13&t=30492
http://gbodyforum.com/viewtopic.php?f=13&t=30999

For more Buick 350 information (not swap specific) you will find plenty at v8buick.com. For information on the transmission, rear end, and suspension do a search on this site and you will find a lot to read. Have fun! 😀
 
Re: Project Ideas for 1985 Cutlass Supreme

olds307 and 403 said:
If you can find a Buick 350, it is supposedly a direct swap. All your accesories, mounts etc swap over. You may need a new rad, cheap new aluminum/plastic one should do. A BOP TH350 is a direct swap, if you have a TH200C in there. It won't last with more torque behind it.


Thanks for your input !
 
Re: Project Ideas for 1985 Cutlass Supreme

Bowiemontecarlo86 said:
I would go with a 4.3 vortex to save gas in it for one. Or a 5.3ls if you still want av8 . Drop it like two inches maybe three in the rear. Put some nice 18 inch wheels on it with some fat t*ts in the back. Tint all the windows like 5%.

Thanks !
 
Re: Project Ideas for 1985 Cutlass Supreme

Evan's 85 said:
olds307 and 403 said:
If you can find a Buick 350, it is supposedly a direct swap. All your accesories, mounts etc swap over. You may need a new rad, cheap new aluminum/plastic one should do. A BOP TH350 is a direct swap, if you have a TH200C in there. It won't last with more torque behind it.
X2.......he can just find a stock gbody v8 radiator & shroud also.

Thanks for the insight !
 
Re: Project Ideas for 1985 Cutlass Supreme

BuickOldsPontiac said:
I would say go with the Buick 350, it is a fairly straight forward swap. For the transmission either a TH350c or a 200r4 again relatively simple (the TH350c more-so). Swap the rear gears (or the whole read end) for a 3.08 if you go with the TH350C or 3.42 or 3.73 with the 200r4. Don't forget to make it a posi. Finally throw in some suspension, steering, and brake mods.

For the Buick 350 swap, I would start by reading these two threads:

http://gbodyforum.com/viewtopic.php?f=13&t=30492
http://gbodyforum.com/viewtopic.php?f=13&t=30999

For more Buick 350 information (not swap specific) you will find plenty at v8buick.com. For information on the transmission, rear end, and suspension do a search on this site and you will find a lot to read. Have fun! 😀

Thanks Man !
 
Re: Project Ideas for 1985 Cutlass Supreme

Hey , just found out more information about my car. Actually instead of having a 200r4 transmission I have a turbo350 automatic trans..... this came in the car when i bought it. this car has a V6 engine....is that good or bad.....
 
Status
Not open for further replies.

GBodyForum is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com. Amazon, the Amazon logo, AmazonSupply, and the AmazonSupply logo are trademarks of Amazon.com, Inc. or its affiliates.

Please support GBodyForum Sponsors

Classic Truck Consoles Dixie Restoration Depot UMI Performance

Contact [email protected] for info on becoming a sponsor