350 vs 200r4 Crossmember Extention??

[80ELCAMINOFLAKE]

Sup guys,so my 350 trannys coming out,it wont go into drive at all, alot of noise in the trans pan like real bad!!, i know the that the yoke/drive shaft/and the case is a universal bolt pattern which is a direct bolt on, i have a 200r4 crossmember that im going to modify for my electric cutouts, but where can i find and extention for the crossmember? I know guys drill another hole,but looking at the frame it dosent look like i can add another hole??? Ck the pic out...

Heres a pic i found online??

 

[Longroof79]

Try Iceman Rick. I bought mine from him several years ago. http://www.maliburacing.com/iceman/
I don't see them on his site any longer. You might have to contact him.
It usually comes with the bolts and directions where to drill your frame....or you could look into buying a piece of square tubing and making your own.
The only other source would be G-Force.
Wouldn't a 200-4R trans mount be several inches back compared to a TH350 crossmember?

 

[GhettoRacingKid]

here is hte lik to his ebay account.

send him a message and ask about just the extention.

http://www.ebay.com/sch/pitqueen/m.html?_nkw=&_armrs=1&_from=&_ipg=25&_trksid=p3686

 

[80ELCAMINOFLAKE]

Try Iceman Rick. I bought mine from him several years ago. http://www.maliburacing.com/iceman/
I don't see them on his site any longer. You might have to contact him.
It usually comes with the bolts and directions where to drill your frame....or you could look into buying a piece of square tubing and making your own.
The only other source would be G-Force.
Wouldn't a 200-4R trans mount be several inches back compared to a TH350 crossmember?

Thanks buddy, i been on Icemans site before, kind pricey huh???? lol...But i but leave the trans mount lines up with the th350 trans mount, just the drive side xmember needs the new holes...but i will ck, u would think other companys would make them

 

[80ELCAMINOFLAKE]

here is hte lik to his ebay account.

send him a message and ask about just the extention.

http://www.ebay.com/sch/pitqueen/m.html?_nkw=&_armrs=1&_from=&_ipg=25&_trksid=p3686

Koo thanks...

 

[FE3X CLONE]

You can buy the extension from Summit Racing or Jegs last I checked.

 

[80ELCAMINOFLAKE]

You can buy the extension from Summit Racing or Jegs last I checked.

Hummmm thats what i was thinking, i will ck righ know....thanks

But i did come across this website, they have them for $40 + $10 shipping....They are not listed on there website, but i did see it with there gforce crossmembers, and yes they do have them in stock and will sell separate...good to know..

http://www.transmissioncenter.net/gforc ... mbers_.htm

heres what it looks like, icemans pic on ebay...I emailed him to compare prices...

 

[FE3X CLONE]

http://www.summitracing.com/parts/sum-770307

 

[80ELCAMINOFLAKE]

http://www.summitracing.com/parts/sum-770307

Ahhhhhh Perfect!!!!! thanks alot, i was looking like crazy right know on there website, and on the phone with someone for like 10 mins and they still couldnt find it ...perfect!!!

 

[FE3X CLONE]

No problem. Took a little searching today at lunch for me as well. I know I had seen them advertised in the new catalog I just received but was a bit tougher finding them online.