86 cutlass floor shifter bracket?

[Bri guy]

Anyone know what the exact name of the bracket that holds the shifter onto the transmission hump? Was in the process of installing new interior but noticed the shifter is mounted by 3 out of 4 self tapping screws, and has 2-3 nuts being used as washers to Gove the right height. It was a column shift car that someone turned into a floor shifter. Just looks odd and not secure

 

[spidereyes455]

This is what you need to properly mount the shifter. https://www.rockauto.com/en/catalog...1222962,interior,center+console+bracket,45728

 

[Bri guy]

So it gets welded to the bump then?

 

[spidereyes455]

Yes, from the factory they were spot welded to the floor and the shifter bolted to them with sheet metal screws. I also have pictures with measurements I took for my brother recently if you need them when you get ready to put the brackets in.

 

[Bri guy]

Sweet. I just ordered it from that link you gave me. But Won't get it til Friday, and there's a big car show on saturday.....but I would be happy to receive those pics/measurements anytime.

 

[spidereyes455]

PM sent with pics.

 

[lilbowtie]

Thats a beautiful install - hope this guy didn't do any other great work on your car.

 

[scarborough]

PM sent with pics.

Yes, from the factory they were spot welded to the floor and the shifter bolted to them with sheet metal screws. I also have pictures with measurements I took for my brother recently if you need them when you get ready to put the brackets in.

i'm doing the same upgrade, i would love to see the picture of the measurement you took
thanks

scarborough

 

[scarborough]

Yes, from the factory they were spot welded to the floor and the shifter bolted to them with sheet metal screws. I also have pictures with measurements I took for my brother recently if you need them when you get ready to put the brackets in.

i'm doing the same upgrade, i would love to see the picture of the measurement you took
thanks

 

[spidereyes455]

Front 2 brackets are measured from the front edge of the floor crossmember the rear console bracket is measured from the rear edge of the floor crossmember. The side measurements are taken with the tape hooked on the pinch weld of the drivers side rocker.

Attachments

• 
  20180609_092609.jpg
  637.5 KBViews: 0
• 
  20180609_092618.jpg
  654.7 KBViews: 0
• 
  20180609_092621.jpg
  671.2 KBViews: 0
• 
  20180609_092716.jpg
  612 KBViews: 0
• 
  20180609_092848.jpg
  555 KBViews: 0
• 
  20180609_101916.jpg
  724.5 KBViews: 0
• 
  20180609_101946.jpg
  234.6 KBViews: 0
• 
  20180609_102000.jpg
  691.8 KBViews: 0
• 
  20180609_102029.jpg
  656.1 KBViews: 0
• 
  20180609_102050.jpg
  619.9 KBViews: 0