New to the forum, Had some cutlass's in the past and am getting ready to build a 400sbc but didn't know what to put it in yet. Planned for a gbody and recently purchased an 84 Cutlass.
It was originally a 3.8 car, now has a 350, headers, 4.11s in a 10 bolt. Body has seen better days in the usual spots - doors and 1/4s. But it did have a fiberglass cowl hood already. Oh and a 200 transmission. Not sure yet if the front coils are cut or if the 6 springs sag that much with an 8, the tires rub turning and it only has 14's for now.
I was younger when I had g body's in the past so I figured I'd come brush up and lend a hand if I am capable.
It was originally a 3.8 car, now has a 350, headers, 4.11s in a 10 bolt. Body has seen better days in the usual spots - doors and 1/4s. But it did have a fiberglass cowl hood already. Oh and a 200 transmission. Not sure yet if the front coils are cut or if the 6 springs sag that much with an 8, the tires rub turning and it only has 14's for now.
I was younger when I had g body's in the past so I figured I'd come brush up and lend a hand if I am capable.
