Okay I've been talked into it...Right now my plans are for a set of 1021004 Brodix Heads: Aluminum, 2.02/1.6, 64cc combustion, 180cc intake. I will be shooting for between 9.5:1-9.7:1 compression, which I've estimated @ about 9.65:1. The cam that comp cams suggested is one of the ones I was looking @, the 12-423-8:
1900-5600 rpm
276 intake/282 exhaust advertised duration
224 intake/230 exhaust duration @ .050" lift
110 lobe separation
.502 intake/.510 exhaust valve lift with factory rocker arm ratio
Let me know what you guys think...
1900-5600 rpm
276 intake/282 exhaust advertised duration
224 intake/230 exhaust duration @ .050" lift
110 lobe separation
.502 intake/.510 exhaust valve lift with factory rocker arm ratio
Let me know what you guys think...
