cam break in

[aint_no_half_stephen]

Hey all, I got a question of course. I have a comp cams xe274h10 cam that I'm going to install. According to the instructions, before break in, the inner spring is to be removed. I can understand why, but the springs I got are single springs with a dampner, not dual. So if there is no inner spring to be removed what do I do? I've also heard of getting some 1.3 ratio rocker arms for break in. Is this necessary? Any thoughts or suggestions is greatly appreciated.

 

[beermonkey9417]

follow the instructions from the cam company. if you dont have inner springs, dont remove what you dont have. if the instructions didnt come with the cam goto there website and look it up or call them and ask.