can you supercharge a 3.8 v6?

Status
Not open for further replies.
Which 3.8 V6?

Buick 3.8/231 or the Chevy 3.8/229 The answers yes to both, but what type of supercharger?
 
Yes, theres a guy that has a kit to put a weiand or a 6/71 blower on a 79-87 buick 3.8. You can't use a M90 (front wheel drive GM 3800) as the seals wont survive the gas. Unless you use a 86/87 GN lower intake and build a mounting plate and run E85 on it. Good luck on the drive.

If you want to use a 3800 L67 you can do a RWD swap, Im doing one into a 4th gen Fbody now. But that takes a ton of fab work. A scary amount actually.

picture-1161.jpg
 
1985cutlasssupreme said:
are those good blowers?

They are eaton m90 (essentially the same as the 3800 fwd superchargers), but keep in mind they were designed for fuel injected applications. You would have to have a good aluminum welder to be able to mount a carb ontop of one of those blowers, but if you could get a oem grand national fuel injection take-off from a racing guy for peanuts, you could make it work. They aren't the most efficient blowers out there...but I went low 13s on one in a fwd monte, and dipped into the 12's on good gas and a 75 shot (wet). The best of that style eaton blower came on the 2004+ grand prix and was referred to as a "genv"

DSCF0106.jpg

DSCF0137.jpg


If you want to keep it carbureted....probably easiest way would be to get a centrifugal supercharger head-unit (vortech, paxton etc), and make a bracket to mount it to your motor, and blow it through the carb....but it would be a little overkill for a stock 3.8 unless you have played with blow-through carbs before. all and all its in the tune. If you know what your doing and can piece together a setup...you could run low boost on the cheap (relativly speaking), and have a fun street car.
 
Status
Not open for further replies.

GBodyForum is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com. Amazon, the Amazon logo, AmazonSupply, and the AmazonSupply logo are trademarks of Amazon.com, Inc. or its affiliates.

Please support GBodyForum Sponsors

Classic Truck Consoles Dixie Restoration Depot UMI Performance

Contact [email protected] for info on becoming a sponsor