Edelbrock E Street or RHS Pro Action Heads?

[ElCamMan515]

Hi, I Would Love Some Insight On What Heads Would Be Best Paired With My Lunati 60103 Cam Shaft. Specs On The Cam Are: Advertised Duration (Int/Exh): 268/276, Duration @ .050 (Int/Exh): 227/233, Gross Valve Lift (Int/Exh): .489/.504, LSA/ICL: 110/106, RPM Range: 1800-6200.

I have been looking at Edelbrock E-Street Heads and RHS Cast Iron Pro Action Heads And Really Cant Make A Good Decision and Do Not Want To Pick The Wrong Heads And Not Be Able To Use The Camshaft To Its Full Potential.
Specs On The Heads Are As Follows:

Edelbrock E-Street RHS Pro Action
Combustion chamber volume 64cc Combustion Chamber 64cc
Intake runner volume 185cc Intake Runner 180cc
Exhaust runner volume 60cc Intake Valve 2.02"
Intake valve diameter 2.02" Exaust Valve 1.60"
Exhaust valve diameter 1.60"

Any Suggestions Would Be Helpful, Thanks Guys!

 

[JBreu]

JMO here, I would go with the Dart Pro-1 Aluminum heads with the 200 CC, 2.02 valves...These heads with my performer rpm air gap and the performer rpm cam (duration234/244, lift 488/510) produced 514 HPO at 6800 rpm and 470 FTLBs of torque on my sbc bored and stroked to 388 CI.......... Ther are kind of expensive but well worth it....

 

[ElCamMan515]

I Would love a pair of dart heads, but i am a full time college student and want to build a lil potent engine on a tight budget and thought the 2 heads i picked, both priced under 1000 dollars were good heads but want to get the right ones to be paired up with the camshaft i got, Thanks

 

[monte olrac]

I would choose RHS heads over Edlebrock's any day of the week.

 

[ElCamMan515]

Car Is Going To Be A Street Car So I Think 180cc Runners Will Be Good And Still Be Able To Get Some Power From My SBC 355

 

[ElCamMan515]

Any Other Opinions Guys??

 

[monte olrac]

as far as runner go, I would go with 190 or 195 vs the 180's...still choosing RHS.

 

[trog]

i like the patriot alum heads--fully assembled for less than 800.00

 

[bigdan]

are you sure the patriot heads are good ? my neighbour bought some ....he`s having trouble since !

with 220 [email protected] lift the edlebrock heads are good performers ......specially at that price !

those 200CC heads are too much for the cam you have ...

 

[ElCamMan515]

are you sure the patriot heads are good ? my neighbour bought some ....he`s having trouble since !

with 220 [email protected] lift the edlebrock heads are good performers ......specially at that price !

those 200CC heads are too much for the cam you have ...

The RHS Heads Have Better Flow Numbers Than The E-Street Heads do you think they would perform better, the machine shop i took my motor to said RHS heads were better than Edelbrocks so im leaning more towards the RHS 180cc Pro Action Cast Iron Heads, Found Them Online for $950