Edelbrock vic jr carb intake problem

[NorthWestRider]

so i ordered a victor jr carb ls intake and when i went to install the intake gaskets (o rings) one side seemed like the gasket would fall in to deep i figured it got machined wrong. So i call where i got it from they send me a new one and this one seems worse. Just wondering if anybody else had or heard of any machine issues wit these intakes. Now i gotta wait till monday so they can call edelbrock to see if may b they produced a bad batch of these intakes. I was hope n to fire up the motor this weekend but not gonna happen now

 

[Garrett1982]

I bought the GMPP single plane for my LS and it uses traditional style Felpro gaskets instead of the stock LS style. Maybe if you can get your money back go with one of these.

 

[Garrett1982]

 

[NorthWestRider]

View attachment 45250 View attachment 45251

I did look at those yesterday but didnt see a single plane for the ls1 cathedral port may b i didnt look right?

 

[565bbchevy]

I would send those pictures directly to Edelbrock and I would also use a micrometer to measure the depth and give them the actual numbers

 

[Garrett1982]

I did look at those yesterday but didnt see a single plane for the ls1 cathedral port may b i didnt look right?

Chevrolet Performance 88958675

 

[NorthWestRider]

I would send those pictures directly to Edelbrock and I would also use a micrometer to measure the depth and give them the actual numbers

Sent the pictures to summit they are suppose to get in touch with edelbrock on monday and show them the pictures and see if may b they made a bad batch

 

[NorthWestRider]

Chevrolet Performance 88958675

Thanks gonna see whatvsummit says on monday and go from there

 

[NorthWestRider]

heres some pics wit gaskets on

 

[V8 Rumble]

Did you get any word yet?