J
Reaction score
44

Joined
Last seen

Latest activity Postings About

    • J
      jcelk replied to the thread Fuel guage not working correctly.
      i had a problem with the cluster push in connector not making good contact check for cracks in the dash part that holds the connector...
    • J
      jcelk replied to the thread 1979 el camino parasitic draw.
      get a wiring diagram and disconnect one thing at a time on that circuit till you find the draw takes time but it;s the only way
    • J
      jcelk replied to the thread Frame Ideas.
      I would cut the area that is missing off your old frame
    • J
      jcelk replied to the thread Factory rocker trim photos?.
      I know the mouldings they are called rocker panel mouldings the top are held in with a round metal clip that attaches to a stud in the...
    • J
      jcelk replied to the thread Painting a vinyl top.
      scrub the top with a spray cleaner really good and rinse with a hose let dry overnight before spraying you can wipe it down with pre...
    • J
      jcelk replied to the thread how's your hose clamp.
      I have had trouble with the spring clamps with older hoses now i have a thin black worm clamp at the very end of the hose and a spring...
    • J
      jcelk replied to the thread Caster adjustment degree readings.
      why would you want to ? 20 in and 20 out is the angles you do all your driving and i never multiplied by 1.5 the reading is the caster
    • J
      jcelk replied to the thread VHT wheel paint crackling.
      there are enamel spray paints and lacquer based spray paints you can put the enamel over lacquer but not lacquer over enamel it will...
    • J
      moldings are usually different but if it;s the same part number it;s the same part
    • J
      jcelk replied to the thread Wtf new gaskets?.
      rocknrod i was referring to the channels that hold the weatherstripping in on the a pillar and roof i could not get the glass to go...
    • J
      jcelk replied to the thread AFTERMARKET power door locks?.
      i have seen aftermarket power windows and locks they never work right best bet find one in a junk yard thats how i converted manual...
    • J
      jcelk replied to the thread Wtf new gaskets?.
      the aftermarket weather stripping is not so good ... after i got my doors to close good i adjusted the glass the best i could get and...
    • J
      put a timing light on it if way off possible timing chain
    • J
      in the first video i saw a puff of smoke while cranking could be an ignition problem check plug wires are in the cap right and check...
    • J
      to plug the vacuum lines you cap the nipple coming out of the carb .. a cracked plug will cause a misfire to cheak this ;while idling...
  • Loading…
  • Loading…

Please support GBodyForum Sponsors

Classic Truck Consoles Dixie Restoration Depot UMI Performance

Contact [email protected] for info on becoming a sponsor