Emissions controls would the M/C have the same system ?

Status
Not open for further replies.

Lazarus

Greasemonkey
Dec 18, 2015
191
18
18
42
Monongahela Pa
Ok my 86 now holds antifreeze!! And after $400.00 has a completely new braking system!!! Now on to PA emissions non tampering Bulls$&t. My uncle has the 87 or 88 SS Monte last year model. Yes has 47 original miles. Bought it as an investment. Bit of a creepy uncle but could I pull hood to hood and cross reference his 305 vacume lines to my 86 Olds 307? Took it to 3 different shops failed it each time refusing to do the work to restore it to non tampering status. Funny I got a $35000.00 open credit on my discover card and they flat out refused to work on my car. Complete disgust!! Thanks again sorry to be a pain.
 
You might politely ask if anyone on the Forum who has a 1986 Cutlass with the 307 could take a photo of their emissions tag (usually on the fan shroud) and/or photos of their stock motor. You can also find a Haynes manual and look at the vacuum line diagrams to help figure out what's missing from your car. You don't want to pay someone the hours and hours it might take to research this. You can easily do it yourself, and put the money into the car instead,
 
Found these. Hopefully will give you an idea. I believe the first one is the one you will need the most.
 

Attachments

  • 1986_vinY_emissiondecal.jpg
    1986_vinY_emissiondecal.jpg
    43.4 KB · Views: 786
  • 1984V8CutlassILCVacuumHoseDiagram.jpg
    1984V8CutlassILCVacuumHoseDiagram.jpg
    75.2 KB · Views: 344
  • 1984V8CutlassECMHarness2.jpg
    1984V8CutlassECMHarness2.jpg
    75 KB · Views: 355
  • 1984V8CutlassECMHarness1.jpg
    1984V8CutlassECMHarness1.jpg
    67.7 KB · Views: 300
  • 1984V8CutlassCruiseControlDiagram.jpg
    1984V8CutlassCruiseControlDiagram.jpg
    41.9 KB · Views: 570
  • 1984V8CutlassCompLocations.jpg
    1984V8CutlassCompLocations.jpg
    71.7 KB · Views: 339
  • 84VINY.gif
    84VINY.gif
    43.1 KB · Views: 332
  • Useful
Reactions: ssn696
Found these. Hopefully will give you an idea. I believe the first one is the one you will need the most.
God bless you. Spent 3 days scouring the internet. Closest I came was a clear diagram for a 82 Olds nighty-eight. Think I got aftermarket headers no ports for o2 nor air pump. I hate Pennsylvania emissions these cars were unregulated until 2002 in Washington county. So the had decades of people ripping parts off now I'll have to pull the engine change it all back plus find a non chopped harness. For a friggin sticker. Meanwhile cruise night you find a 454 forced induction 88 camero got an emissions sticker. Then the 91 mustang with open pipes with an emissions sticker. Lol jerks!
 
God bless you. Spent 3 days scouring the internet. Closest I came was a clear diagram for a 82 Olds nighty-eight. Think I got aftermarket headers no ports for o2 nor air pump. I hate Pennsylvania emissions these cars were unregulated until 2002 in Washington county. So the had decades of people ripping parts off now I'll have to pull the engine change it all back plus find a non chopped harness. For a friggin sticker. Meanwhile cruise night you find a 454 forced induction 88 camero got an emissions sticker. Then the 91 mustang with open pipes with an emissions sticker. Lol jerks!


Glad to help man! Good luck and let us know how it goes.
 
Last edited:
  • Informative
Reactions: ssn696
Status
Not open for further replies.

GBodyForum is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com. Amazon, the Amazon logo, AmazonSupply, and the AmazonSupply logo are trademarks of Amazon.com, Inc. or its affiliates.

Please support GBodyForum Sponsors

Classic Truck Consoles Dixie Restoration Depot UMI Performance

Contact [email protected] for info on becoming a sponsor