gp 403 swap power steering hose issue

[81gbody403]

i was wondering if i could swap out my old pump from my 265 and put it on the 403. the hose is diffrent. can anyone help?

 

[Kennybill]

I cut the one end off and mig'd the correct end on

 

[RITTER]

Just take the two end sizes that you need and have a hydraulic hose made at NAPA 4000PSI MAX hose with crimped ends. You'll never have to worry about it :idea:

 

[G-Body_Vet]

When you say different, is it just the hose shape or are we talking about the ends? IIRC, there was a cutoff year when the hoses changed from a flare fitting to an o-ringed style. I haven't done this in awhile, but going from memory I believe you can swap the fitting from the back of the pumps to correspond with whatever steering box you have. Someone chime in if I'm wrong.

 

[bill]

When you say different, is it just the hose shape or are we talking about the ends? IIRC, there was a cutoff year when the hoses changed from a flare fitting to an o-ringed style. I haven't done this in awhile, but going from memory I believe you can swap the fitting from the back of the pumps to correspond with whatever steering box you have. Someone chime in if I'm wrong.

(in my Ed McMann Voice)....You are Correct Sir!...gotta be old to remember that line...lol