help please need rear brace on floor 87 regal

[jregal]

looking for the brace that goes all away across the rear its on the outside under the car in the back seat area from inside rocker to rocker i believe. this brace also apears to have the nuts that hold the body to frame. i live in wi and mine is rusted out on driver side and the nut and bolt is rusted out not connected to brace. looking for one that is complete pretty rust free solid and that someone did not bend all up removing. ive already replaced entire floor pan this is last piece puzzle and no one makes it after market shoot me an email at this address [email protected] with price shipping cost etc. or where its at thanks much car is an 87 regal

 

[kustomkyle]

Just started patching the few rust spots in the floor of my 86' Limited, and just by chance shined a light on the driver's side crossmember behind the door/in front of the back seat and it is rotted out too. The car isn't rusty, but apparently that area held moisture like there was no tomorrow. Not really sure what I am going to do yet either, taking the body off the frame isn't an option. I was thinking of getting a floor brace for a '70-'72 Chevelle (since they are available new) or something and section the end in through the top (as long as the crossmember is somewhat similar).

 

[CWPottenger]

These two companies make a bunch of repair panels and braces. they don't list on the web for our years, but may have them.

http://www.autobodyspecialt.com/cgi-bin ... splay=home
http://www.c2cfabrication.com/


When I fixed mine I fabricated the brace from the original by cutting out and welding new steel in place. Good luck on project.