hutchhiper 442 project

[scarborough]

I think he's using 81-83 split tail taillights with LED inserts on his car, though. Unless I'm missing something.

yes your right, but I thought some where in the video it showed the emblem had been removed from the lens

 

[scarborough]

I just used a small pocket flat blade that I had turned into a specialty tool for something years ago. The tip is bent at a 90 degree angle almost like a 90 seal pick but beefier. I just wedged it in where I could and kept pulling straight out all around the perimeter. I didn't rock it against the plastic. It didn't take much as I remember.

I only pulled them out because the one center rocket fell out, so the aim was to replace them.

Hutch

thanks ill try that. I did try wedging some 8 lb. fishing line in between the lens gave it couple hard tugs but it didn't come loose, I didn't want to take a chance of cracking the lens