Inner fender disassembly question

[Kwik_Cutty88]

How do you guys get to the bottom screws that hold the inner fender in on a cutlass? Left side just hard to get too, right side the heater box is in the way.

 

[CWPottenger]

I have always taken the outer and inner fender off at the same time, then split them once out.

 

[Kwik_Cutty88]

I have always taken the outer and inner fender off at the same time, then split them once out.

I'd rather not, but if that's what it takes. Anyone else?

 

[xitabl442]

X2 on taking them off together, then separating.

 

[lg1200]

get a good flashlight or lamp and shine through the bottom of the lower control arm and you'll see the two bottom bolts. you'll need a fairly long extension and swivel adapter for your socket (magnetized will help when the bolt is out..if it falls where you can't get to it..removing the out fender may be easier but this is how i did...now i'm faced with getting those two same bolts back in which i may only have the patience for one..both aren't needed to support the wheel well.