Junkyard 700r4 swap

[321GO]

is there a car from the junk yard I can get a drive shaft from that is 49.5 inches for the gbody 700r4 swap

 

[UNGN]

Generally for a a 700R4 swap you cut 3" off a TH350 drive shaft, which is why some people prefer the 2004R.

Removing 3" from a driveshaft isn't that big of a deal and there may be someone local who can do it for $100 or so.

 

[UNGN]

Camaros and 2dr S10 Blazers drive shafts are probably too short and you can't work with that.

 

[321GO]

Camaros and 2dr S10 Blazers drive shafts are probably too short and you can't work with that.

It’s going in my ttype I twisted my factory one so i don’t got one at all lol

 

[UNGN]

A G-body one would be best but any one you buy will need to be shortened... therefore any one that's longer should work as a core - B-body, 2nd gen F-body, etc.

 

[fleming442]

It’s going in my ttype I twisted my factory one so i don’t got one at all lol

If you twisted the stocker, I think you should be looking to upgrade, not throw a junkyard part in....