Just a quick question about power steering hose placement...

[rogus]

With the oem power steering gear box the high pressure line from the pump goes connected to the opening nearest the drivers side fender, yes?

 

[melloelky]

The return is closest to the fenderwell on mine.

 

[rogus]

The return is closest to the fenderwell on mine.

Thank you! You just saved mre a crap-ton of time.

 

[rogus]

Thank you! You just saved mre a crap-ton of time.

and probably money too....

 

[69hurstolds]

??? Should be two different size fittings. You shouldn't be able to mess it up. M16 and M18 threads IIRC, but again, it's been a while, so I could very well be wrong.

 

[timo22]

Agreed, a factory pressure hose only fits one port.

 

[rogus]

??? Should be two different size fittings. You shouldn't be able to mess it up. M16 and M18 threads IIRC, but again, it's been a while, so I could very well be wrong.

yes, normally but the fittings have been changed to 5/8 to 6an's on both sides...

 

[rogus]

Agreed, a factory pressure hose only fits one port.

yes, normally but the fittings have been changed to 5/8 to 6an's on both sides...