Looking for a swap kit

[Chased]

Do anyone make a kit to drop a LT1/4L60 in? Headers/Crossmember etc.... Not the new LT the Optispark style

 

[pagrunt]

Do anyone make a kit to drop a LT1/4L60 in? Headers/Crossmember etc.... Not the new LT the Optispark style

All you really need for the gen2 SBC/LT1 is SBC mounts for our cars, aftermarket crossmember & I do believe SBC headers should work.

 

[BuickOldsPontiac]

SBC mounts and an appropriate cross member for the transmission. If your 4L60E is from a B-Body car it might have the tail housing with the second mount that is in the same location as the 2004r and TH400.

If I recall correctly, with the stock LT1 accessories, you may have to notch part of the frame for the A/C compressor. If you search around the board, maybe in the builds section, you should find information on that.