looking for rear brake upgrade

[gpexpress]

i have an 84 GP and want to up grade the rear brakes. already looking at upgrading the front to LS1 but need to know what parts i need for it. as for the rear i want to go with disc. want to know what parts i can get off what cars to make this happen. i not looking to spend big money on the kits. also i was thinking about swapping the rear that already as disc from an f body but dont know about the width.

 

[MR442]

I'll be watching this. There is the setup for early Caddy and the F body swap . ... But I always watch for a good link or description myself .

I have 2000 + 2wd S10 rear in shed with disc brakes . But I dont know what flange you have.

Some one will post I'm sure.

 

[fraido2002]

This is what I plan on doing, check it out.

http://www.turbobuicks.com/forums/buick ... ke-em.html

http://www.turbobuick.com/forums/brakes ... -swap.html

 

[pontiacgp]

I'm using a 67 Chevelle rear, F body calliper brackets and rotor and 1980 Seville rear callipers with the parking brake. I made a shim of 1/8" to place inbetween the flange on the rear and calliper bracket to center the callipers on the rotor.

 

[Joltcola]

This is what I plan on doing, check it out.

http://www.turbobuicks.com/forums/buick ... ke-em.html

http://www.turbobuick.com/forums/brakes ... -swap.html

Thanks for posting this...this whole thread is very helpful! 😀