Loose screw

[john87442]

Ok group, I’m trying to clean up the threads of my h/o rear spoiler so I can get it installed.
The body guy didn’t take the time to tape the threads before painting ( a nice job) .
So I’m wire brushing and using a bolt to work on and off to chase the threads but it spun this one and now what should I use an epoxy to set it in place and let it cure or what?
Ideas welcome please and thanks

 

[pagrunt]

Here's some ideas but not really cheap & needs a dispeser gun.

https://www.amazon.com/Lord-Fusor-Repair-Adhesive-Slow/dp/B00BD3UKGM?tag=gbody-20

https://www.amazon.com/3M-08243-Fiberglass-Repair-Adhesive-1-200/dp/B005IU1J3O?tag=gbody-20

 

[565bbchevy]

I bought the gun and used the 3M which works very well, once you use panel bond you find many other uses for it that you maybe didn't think of before.
I used it on my Regal for bonding my GNX wheel flares to the body and also used it to bond aluminum strips to the interior roof to add support when I installed my power sunroof and to reinforce my front spoiler with aluminum to add strength.

 

[melloelky]

if you can't get your hands on the full sized app gun check out SEM mini max,.it's a smaller cheaper handier version

 

[john87442]

Thx for all that feedback