Modifying center console

[MechMan]

Is there a write up somewhere showing how to modify the center console on a 83-88 Monte Carlo SS for a manual transmission?

 

[Injectedcutty]

Google is your friend, I'm sure there is something out there.

 

[Longroof79]

Seek and you shall find. 😉

 

[JAMCAR223]

I think i remember seeing something on the MonteCarloSS forum. If you find it post a link if you don't mind.

 

[ssn696]

The OP is over a year old, but I'll take the bait. If it's for an internal rail shifter like a T5 or T56, you just need to edit the shift plate to take a boot.

BUILD THREAD - 1980 Malibu Coupe - 3.3 Liters to 6.6 Liters

If no one minds some time travel, I will start a build thread for my coupe. In 1999, I went back to college to earn a mechanical engineering degree, a decade after having the screen door slap me in the *ss. Across the street from the ME building was a church parking lot I used as a commuter...

gbodyforum.com

 

[TURNA]

like this?

 

[MechMan]

TH

The OP is over a year old, but I'll take the bait. If it's for an internal rail shifter like a T5 or T56, you just need to edit the shift plate to take a boot.

BUILD THREAD - 1980 Malibu Coupe - 3.3 Liters to 6.6 Liters

If no one minds some time travel, I will start a build thread for my coupe. In 1999, I went back to college to earn a mechanical engineering degree, a decade after having the screen door slap me in the *ss. Across the street from the ME building was a church parking lot I used as a commuter...

gbodyforum.com

This would be to use a T56 magnum. Just trying to get ideas for when it is time to start modifying. I bought a seperate OEM shifter plate to play with.

 

[TURNA]

mine is a T56